Here’s a list of the parts i ended up buying for each copper pipe curtain rod (thanks again, earl) 1. The post from the wall that connects the flange and the tee so you can hold the rod in place :
Metal conduit only costs around $.50 a foot , but still offers a higher strength than a lot of store bought curtain rods.
Diy metal pipe curtain rod. 1 copper pipe , 1/2 inch by 5 feet; But the curtain rod doesn’t necessarily have to be mounted on a wall. Materials for copper pipe curtain rod.
That way, your curtains can easily be covering stuff like beds, and not only windows. We used this same super cheap diy curtain rod method in our old home for a custom bay window rod, and. Create a beautiful diy drapery rod using a 2″ pvc pipe.
Www.worthingcourtblog.com simple diy projects from my breakfast area makeover. If installing into a stud, drill pilot holes first so your screws sink in easily. When your drape on and ready to go, move the rod back towards the center support and screw the 1/2 ” pipe into the 1/2 ” tee opening.
Two 1/2 inch 90 degree elbows. If installing into a wall without a support, drill pilot holes and insert wall anchors before driving your screws in the wall. Select your width based on the size your curtain rod brackets can accommodate.
Set flange against wall in desired location. Just ask!) two 1/2 inch floor flanges. Galvanized pipe and yarn hanging curtain rod tutorial:
Insert the pipe, then dry fit the other flange placement. My goal was to make curtain rods similar to the pottery barn standard drape rod but at a much lower cost. See more ideas about curtain rods, pipe curtain rods, diy curtains.
See how you can make your own diy curtain rod out of pvc pipe to add to an existing rod and save tons! Finally, attach a floor flange to nipple. This diy pipe rod offers you the opportunity to create a custom length rod that fits into standard curtain rod holders.
Depending on the length you need your curtain rod to be, you may need more than one 10 foot piece. 3) next, attach an elbow joint to each end of your pipe rod. Insert metal anchors first using a cordless drill.
Materials for diy industrial style pipe curtain rods. Galvanized pipe cut to desired length (make sure it’s longer than your window’s width, with room to allow for the threaded ends) and threaded on both sides (home depot will do this for free! Now you don’t need to spend so much money to buy curtain rods , looking every store for the proper size.
Hold the rod up to the desired locations on the wall, and secure with screws. Base to hold curtain rod on the wall trim : Installing the pipe curtain rod.
Slide a length of 1/2 ” pipe into your 3/4 ” tee. In this diy tutorial, i’ll show you how i put together a super cheap diy curtain rod using electrical conduit or pipe. Set flange into place over anchors.
See more ideas about curtain rods, curtains, diy curtains. Pencil in the screw holes. You can also hang it from the ceiling.
My biggest window needed a 106 inch bar which would have set me back $50 from pottery barn. Let’s not forget the itty bitty parts called nipples …. Also, it allows you to save a great deal of wall space.
Once painted and hung, no one will know this rod came out of the electrical. At lowe’s, conduit pipe comes in lengths of 5 and 10 feet with widths of.5,.75, 1, 1.25, and 1.5 inches. 2) put your drapery rings on your pipe rod (you won't be able to slide them on after the next step, so don't forget)!
Spray painted dark for a more industrial flair, this diy project helps. 5) now you are ready to hang your diy curtain rod. 4) then attach a steel nipple to the other side of each elbow joint.
This instructable will show you how to make strong, attractive and low cost curtain rods out of metal conduit.